Product Description

Aluminium hardtail, sporting easy to accelerate and nimble 27.5" wheels, our more comfort-focused geometry, 100 mm of front suspension and a double chainset setup, giving you plenty of gears to choose from and lots of comfort and control.

Double chainring equipped entry-level 27.5" aluminium hardtail featuring a more upright and, therefore, more comfortable riding position than our more race-focused hardtails. The riding position puts less strain on the lower back and also improves the visibility of what lies ahead. A 100 mm suspension fork from SR Suntour and hydraulic disc brakes improve comfort and control even further.

The alternative to our BIG.NINE 29er hardtails for riders who prefer the smaller 27.5"" wheels. The latest aluminium frame generation of our BIG.SEVEN TFS and SPEED mountain bikes featuring slim tube shapes create a new look and a more relaxed geometry. A shorter top tube and a higher head tube offering a more upright riding position and enhanced trail visibility. Similarly to our 29er wheeled BIG.NINE range, our classic BIG.SEVEN hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we could gain in almost half a century of bike production and manufacturing. They symbolise the symbiosis between modern frame technology, attention to detail and craftsmanship 'Made in Taiwan'.

• Double butted aluminium frame with 27.5" wheels
• Less aggressive and more upright geometry for maximum control and comfort
• SR Suntour 100 mm travel suspension fork with lockout
• Shimano 8-speed drivetrain with double chainring setup
• Hydraulic disc brakes
• Internal cable routing

SPECIFICATIONS

FRAMEBIG.SEVEN TFS III

• material: aluminium
• 27.5x2.25" max. wheelsize
• 135x9mm axle standard
• BSA bottom bracket standard

FRAME SIZEXS, S, M, L COLORMATT FALL GREEN (BLACK) FORKSR Suntour XCT30 HLO

• Coil
• 100mm suspension travel
• Lockout
• 27.5x2.25" max. wheelsize

BRAKESPower DS100

• 2 piston
• hydraulic disc brake

ROTORSShimano RT10

• 160 mm

HEADSETMERIDA M2345 HANDLEBARMERIDA CC

• material: aluminium
• 690mm width
• 15mm rise

HANDLEBAR STEMMERIDA CC

• material: aluminium
• 31.8mm diameter
• 6° stem angle
• 70 mm-XS/S, 80 mm-M, 90 mm-L

GRIPMERIDA EC DERAILLEUR (F)Shimano FD-TY700 DERAILLEUR (R)Shimano RD-M360 SHIFTERSMicro Shift TS39-L / Micro Shift TS39-8R SEAT POSTMERIDA CC

• material: aluminium
• 30.9mm diameter
• 15mm setback

SEAT CLAMPMERIDA COMP QR

SADDLEMERIDA Sport comfort PEDALVP VPE-891 CHAINSunrace M84 CRANKShimano TY301

• 42-34-24 teeth
• 170 mm-XS/S, 175 mm-M/L

FREEWHEELSunrace CSM668

• 11-32 teeth
• 8 speed

BOTTOM BRACKET FSA TH-7420ST-W, Cartridge Bearing HUBSShimano TX505

• 100x9mm width front hub
• 32 spoke holes
• Centerlock
• 135x9mm width rear hub
• 32 spoke holes
• Centerlock

RIMMERIDA CC

• 17mm inner width
• material: aluminium

TYRE FRONTMERIDA K1080

• 27.5x2.2"
• wire

TYRE REARMERIDA K1080

• 27.5x2.2"
• wire

SPOKESBlack steel MAX. WEIGHT135 kg

GEOMETRIES

TECHNOLOGIES

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smoothsockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

DOWN TUBE EXIT

Ensures that internally routed cablesand wires can’t move freely and remaineasily accessible for servicing.

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames.We use an additional heat treatmentand double-butted wall thicknessesto produce light and stiff frames.

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by usingnegative moulds, at times combinedwith an internal metal core.

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikesrequire model specific mud guards),making fitting fast and simple.

K-MOUNT

Integrated mount on the chainstay tofit a MERIDA kickstand (or any commercial kickstand).

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specificrear rack), making fitting fast, simpleand reliable.